Format the Computer

• The first step to format your computer is to obtain a disk, CD, installation of Windows XP.

• Then must make sure your PC does boot from the CD-room. For the default boot is made from hard disk. To change this if your PC turned on press F12 to enter the BIOS. In the window that will open us up looking boot menu. it should be used arrows select the CD-room.

 

• Then insert the cd and do restart the PC.

• When your PC will turn on you come to a type msg "Press any key to boot from cd", in this moment to press a button any tastieres.

• Will open the formatting menu. Read carefully and select the options you want. See explanations in the following figures. 

 

• When you finish installing Windows and your PC to be functional again check that all the drivers installed tjene. If you live anywhere from the CD lacks any of your PC or by searching online.

• After these your PC is ready and can install all the programs you normally use

 

Format Windows XP

This explains step-by-step how to format hard drive partition using the Windows XP installation CD.

Before you continue, make sure you have backup of all documents you may need that are saved in C:, My Documents folder or your desktop.

Tip: Click the images to enlarge.

Step 1- Installation CD Insert your Windows XP installation disc into your CD or DVD drive.

Step 2 – Restart your computer and start Windows setup using Microsoft Windows bootable XP disk
Restart your computer. As you computer boots, a screen with message “Press any key to boot from CD..” will show up counting from 9 to 0, here you need to press any key to start the setup. Note: If your computer doesn’t display the “Press any key to boot from CD..” message (by default it should), check your motherboard manual for info where to enable the “Boot from CD” setting, after you enable “Boot from CD” option from your BIOS, the message will show.
Step 3 – System Loading
After you enter the setup, the CD will load up a blue screen and will start loading operating system files (this make take few minutes). When it finishes, it will list a few options, “Press ENTER to set up Windows XP now” is the one we need. Click it.

Step 4 – Accept Windows usage agreement
Second screen is “The windows usage agreement”. It should be displayed now, showing that you need to press F8 to accept the agreement. Press F8 to accept. How to format a computer

Step 5 – Setup start
If an existing Windows XP installation is detected by the system, you are prompted to repair it. We will bypass this step

Step 6 – Delete old partition and format
At this point you need to select the partition where you prefer to install Windows Xp. This is where you will delete your partition and format drive C. The box in the lower half of the screen shows all your drives and the partitions that currently exist on your hard disk. Use the Up and Down Arrow keys to highlight/select your “C:” partition and press the “D” key (pic 6.1). On the next screen press the ‘L’ key (pic 6.2) to confirm that you want to delete partition “C:”, and finalize the deleting of the partition. (if you have only “Unpartitioned space” and you have no C: or D: partitions, skip this step) How to format a computer

Step 7 – Create installation partition
Now you should be back on the screen prompted to choose where to install Windows. The box on the lower half of the screen should no longer show a partition, instead of “C:” you should see “Unpartitioned space xxxxxMB”. Select/highlight this with the arrow keys and press the “C” key to create a partition on the drive (this is where you will install windows). Now setup tells you the minimum and maximum sizes the partition can use and lets you pick the size. The default size is the maximum available, leave the default value and press Enter.

Step 8 – Format the computer (the hard disk)
This screen lets you choose the file system you prefer the drive to be formatted with. Choose NTFS “Quick” (recommended because NTFS is faster and more secure). Use the arrow keys to select and hit Enter. How to format a computer

Step 9 – Start Windows XP Setup Setup will start to and will auto-format the “C:” partition, and start with Windows XP installation. From here you are all set and the installation of Windows will proceed. This will take a while. The computer will reboot several times, and will continue with installation. Don’t remove the Windows XP setup CD, and don’t press a key when prompted (we already did that).

Format Windows Vista

In this tutorial we will be installing clean version of Windows Vista.

Usually people format windows vista in try to fix their system, repair some functionality or upgrade from windows XP.
Recommended: If you are not sure about your computer hardware compatibility with Windows Vista, get this Upgrade Advisor and check your system compatibility. Next make sure that you have the Drivers CD (that came when you’ve purchased your PC), or if you don’t have them, download the latest Vista drivers for your hardware (you can find them at the support section of your hardware manufacturer, remember to save them to different partition than “C:” (don’t save them in MyDocuments folder, it will get deleted with the formatting), safest way is to store them in other partition than C: (ex. D: , E: , removable drive like USB or burn them on a CD/DVD)

Now after you are sure that your PC is compatible with Vista, and you have all the drivers saved, you can proceed with Formatting Windows Vista.

Step 1. Insert your Windows Vista DVD. The DVD is bootable so after you restart your PC (with the DVD inside) the Windows Vista Setup will begin loading ( if the setup doesn’t start automatically, make another restart and press F2, or F8 after the boot screen and select boot from DVD ).
Step 2. The first screen of the Format Windows Vista sequence will show up. At this point you need to select your Language and Time and currency format (click the image to enlarge). Press Next.
Step 3. Press Install Now

Step 4. After a min you will be asked for your Product Key.
Scenario 1: If you don’t have your product key, you can skip this step and at the next step you will be asked to pick Vista Package that you want to install : Vista Home Basic, Home Premium, Business, Ultimate. If you install windows vista without providing product key, after 14 days you will have to enter a valid product key, or if you don’t, you’ll be forced to format windows vista again. This is good if you want to test which windows vista version is best for you, before your purchase.

Scenario 2: You enter your product key (keep it handy!), and at the next screen your purchased version will be auto-recognized.

Step 5. Accept the Microsoft Windows User License Terms and press Next
Step 6. Dialog – “Which type of installation do you want ?”
Scenario 1: If you already have another operating system installed (ex. Windows XP) you will have the Upgrade option enabled. It’s up to you to decide if you prefer “clean” install or upgrading from previous Windows Installation. Clean install is recommended for improving system performance, and Upgrade Setup is recommended if you have some files in your C: , My Documents, or Desktop folders that you don’t want deleted.

Scenario 2: You already have operating system installed but you want to format your drive, deleting the old system and installing fresh Windows Vista copy. In that case select the C: drive and press Format ( don’t format all drives! only the primary where we are installing Windows Vista – ” C: “. The setup will do the rest.

Step 7. Select Disk 0 and click Next
Step 8. The copy process will begin. This process can take some time, so relax a bit, make a coffee or something :D . Your input won’t be required here for some time.
Step 9. After Windows Vista Setup finishes, the computer will reboot.
Step 10. Windows Vista files are copied , and now setup will configure Windows Vista for your PC. This step will take some really good time.
Step 11. Installing Windows Vista finishes, insert your User Name and Password here.
Step 12. Give your PC a name! and select one of the colorful backgrounds
Step 13. Select your preferred security settings. If this computer is not behind a firewall, the best option is the ” Use Recommended settings”. If you are using firewall then you can select “Install important updates only” (Windows Update). If you want to be protected and your Windows Vista to have the latest updates from Microsoft , select the first option.
Step 14. Select your time zone and location.
Step 15. Network Configuration – Select your computer location. This settings sets your network permissions.
Step 15. This is self explanatory :) Welcome to your new Windows Vista Operating System
Step 16. After you press Start, some Windows Vista settings will be upgraded automatically.
Step 17. You now need to install some drivers that the system will not install automatically.
Thats it! You’ve finished installing Windows Vista.

Format Windows 7

Windows 7 is far better than previous windows versions (XP and Vista). The install process is plain simple and easy to follow. Big Bravo! for Microsoft for this. Now, just follow these steps and you will install windows 7 in no time

You can Install Windows 7 via DVD Disk you’ve purchased or with bootable USB.

This post explains installing windows 7 with dvd disk.

- 31 steps total, every step is screen-captured


First, insert your Windows 7 Boot Disk into your dvd drive and reboot your PC

While the PC is rebooting, you will be prompted ” Press any key to boot from CD…” Just press any key here


After you press a key, windows will load installation files.
Windows 7 setup will start
Select your language, time and currency format and keyboard input (US)
Click Install Now to proceed
Setup will load for a min or two
If you do, select I accept the license terms and click Next
If you are upgrading from Windows Vista select Upgrade, if you had Windows XP you have to select Custom (Advanced). Upgrade from Windows XP to Windows 7 is not available. Click Custom (Advanced)
Select the Partition where you want to install Windows 7 and click Next. You will need at least 5716mb free space.
If you don’t have enough free space to Install Windows 7, you will receive the following warning
If that’s the case, you will need to format the partition where you previously had Operating System installed. WARNING: Formatting a partition will erase all existing data on the partition, proceed only if you have backed up all your files!
If you want to format the partition, go to Drive options
and format the partition where you want to install windows 7. Again, do this only if you have backed up your documents/files!

click format and then yes

After you press Next, Windows 7 Installation will begin. Approximately takes about 30 min to 1 hour to finish, depending on your computer speed.
After half an hour, setup is complete and windows 7 installation is almost finished. Few more minutes
Now your computer will reboot, since the Windows 7 DVD boot disk is still in the drive, the message press any key to boot from DVD will appear. We already did that, so this time DO NOT press anything. Just wait 5 sec and your PC will continue booting and finish installing your operating system.
Windows will continue booting and installing, almost there!


Finally!
Insert your name (this will be your windows username)

If you want to, insert password for your computer. ( Hey….you won’t forget it, right? :) )
Insert your Windows 7 product key and press Next
Do you want Microsoft Updates for your new operating system? It is highly recommend you know…! Select use recommended settings
It’s time for Time zone, select yours from the drop down menu
Depending on your location, select the appropriate network location.
If you have more than 1 computer, type homegroup password for sharing files. Make sure to remember it
Windows is finalizing your settings
Can you see the finish line ? Yup, we’re there
That’s it. Now insert your computer manufacturer drivers CD and install drivers. Also FYI, Windows 7 has great driver support, go to Start –> Control Panel –> Select View By = Small Icons –> Click Windows Update
Check for updates and click on optional updates, to see which drivers windows 7 found for your computer automatically.

Install Windows 7 - Welcome screen

format floppy disk

- Start Windows Explorer, Windows NT Explorer, My Computer.

- Role the right mouse button to snap the drive containing the floppy disk you wish to format, and then click Format on the menu that appears.

- In the Format dialog box, click the choices you desire to use to format the disk, and then click Start.

Options that are available:

This will depend on the floppy disk that we are formatting, most disks are now 1.44Mb, it is best to exit this choice as it is.

FAT or NTFS, FAT is the natural file system for floppies, nevertheless if you take a utility set up to enable NTFS floppies so choose NTFS, if you are uncertain or FAT is the only alternative then just leave it on FAT.

Allocation Unit Size: This should be left on the default unless you have a reason to switch it.

Volume Label: This is where you can enter a label for your floppy disk, merely typewrite the name into the box, in our case we have called the disk New Disk.

Quick Format: This alternative can be selected if the disk takes antecedently been formatted and you just want to free the data away the disc.

Make an MS-DOS startup disk: This choice can be applied to copy system files over to produce a bootable system disk .
When you have chosen the options that you wish merely click on the Start button.

After snapping Start you will be given a warning informing you that every data on the floppy disk will be deleted, assuming on that point is no data on the floppy that you demand click ok.

Later clicking OK you will see a progress bar and that will be followed by an alert making knowns you about the condition of the format, ie whether it was prosperous or not.

If you desire to format another floppy disk then enter a different volume label and then click the Start button in the format dialog box over again.

When finished click Close button.Your floppy disk is now formatted and can be used to stock your files.